Back To Top

VOICE GRADE ARJ11 JACK

Locking bezels provide distinctive jack identification with color and Icon options for port identification (bezels ordered separately).

The ARJ11/12 modular jacks can be used alone or with a variety of faceplates. They are also available with a pre-wired 6 inch pigtail harness (ARJ11W) and mating connector.

IDC contacts meet durability requirements of TIA 568A.

Plastic housing meets Flame Retardant UL94 V-O

Color code your jack to EIA/TIA 606 specifications or to match your décor.

Available Bezel Colors: (Bezels ordered separately)

Electrical Ivory                                                                                   Normally Stocked

Office White                                                                                       Normally Stocked

Black                                                                                                  Normally Stocked

Red                                         Key Telephone Systems

Green                                     Network Communications

Blue                                        Station

Data Gray                              Second Level Backbone Gray        Normally Stocked

White                                      First Level Backbone

Orange                                   Demarcation Point Orange

Yellow                                     Miscellaneous Yellow

Purple                                     Common Equipment

Brown                                     Interbuilding Backbone

Available Icon Identifier:

BLANK                                   Normally Stocked

Voice                                      Normally stocked

Fax                                          Normally stocked

Modem                                   Normally stocked

Data

Lan

SPECS: 4/16 Mbps Token Ring, 100 VG Any LAN, 155 / 622 Mbps ATM, 10 Base-T Ethernet, and 100 Base-TX Fast Ethernet.

Measurements:

Width: .74"

Height: .76"

Depth: 1.2"

Panel Thickness: .08” (Panel thickness thinner than .08” should use the AJS01 shim to provide a snug fit.)

Download:   DRAWING AND SPECS FILE (ACROBAT .PDF)

                        BROCHURE

Back To Top

ARJ45 (Check out the Press Release)

CAT 5E RJ45 modular jack contacts meet requirements of IEC 603-7 and Gigabit Ethernet performance to IEEE 802.3ab specifications. Locking bezels provide distinctive jack identification with color and Icon options for port identification (bezels ordered separately). The ARJ45 modular jacks can be used alone or with a variety of faceplates.

IDC contacts meet durability requirements of TIA 568A.

Plastic housing meets Flame Retardant UL94 V-O)

Color code your jack to EIA/TIA 606 specifications or to match your décor.

Available Bezel Colors: (Bezels ordered separately)

Electrical Ivory                                                                                   Normally Stocked

Office White                                                                                       Normally Stocked

Black                                                                                                  Normally Stocked

Red                                         Key Telephone Systems

Green                                     Network Communications

Blue                                        Station

Data Gray                              Second Level Backbone Gray        Normally Stocked

White                                      First Level Backbone

Orange                                   Demarcation Point Orange

Yellow                                     Miscellaneous Yellow

Purple                                     Common Equipment

Brown                                     Interbuilding Backbone

Available Icon Identifier:

BLANK                                                                                               Normally Stocked

DATA                                                                                                 Normally Stocked

LAN                                                                                                    Normally Stocked

Measurements:

Width: .74"

Height: .76"

Depth: 1.2"

Panel Thickness: .08” (Panel thickness thinner than .08” should use the AJS01 shim to provide a snug fit.)

Download:   DRAWING AND SPECS FILE (ACROBAT .PDF)

                        BROCHURE

AJS01 Shim

Made of high quality spring steel, the AJS01 shim is use when either the ARJ11 or ARJ45 is mounted in a material less than .08”. Its curved shape is designed to provide a snug fit in materials .030” to .056”.

Back To Top

ABE06XXX and ABE08XXX BEZELS

(Use with ARJ11 and ARJ45 Jacks)

The ABE series Bezels provides a clean finished installation of RJ11 and RJ45 installations. The Bezel "LOCKS" the jack into the faceplate or sub-straight.

The ABE06XX bezel has built-in fins (barriers) to prevent inadvertent damage due to side-to-side movement of modular plug.

Plastic housing meets Flame Retardant (UL 94 V-0).

Bezels are color coded to EIA/TIA 606 standards, or choose a color to match your décor.

Available Bezel Colors:

00        Electrical Ivory                                                                       Normally Stocked

01        Office White                                                                           Normally Stocked

02        Black                                                                                      Normally Stocked

03        Red                             Key Telephone Systems

04        Green                         Network Communications

05        Blue                            Station

06        Data Gray                  Second Level Backbone Gray        Normally Stocked

07        White                          First Level Backbone

08        Orange                       Demarcation Point Orange

09        Yellow                         Miscellaneous Yellow

10        Purple                         Common Equipment

11        Brown                         Interbuilding Backbone

Available Icon Identifier:

BLANK                                   No Identifier                                       Normally stocked for ARJ11 & ARJ45

V                                             VOICE                                                Normally stocked for ARJ11

F                                              FAX                                                    Normally stocked for ARJ11

M                                             MODEM                                             Normally stocked for ARJ11

D                                             DATA                                                 Normally stocked for ARJ45

L                                              LAN                                                    Normally stocked for ARJ45

Measurements:

WIDTH: .80"
HEIGHT: .85"
DEPTH: .3"

Create Part Number

ABE06XXX or ABE08XXX

Replace first 2 “X” with color code. Replace 3rd “X” with label code.

i.e. ABE0601V  =  ARJ11 bezel, Office White, “VOICE” label.

Download:   DRAWING AND SPECS FILE (ACROBAT .PDF)

                        BROCHURE

Back To Top

AFP01XX
Oversized Faceplates - 1 – 6 Port

1 to 6-port, these faceplate styles feature larger surface coverage for imperfect drywall cuts. Faceplates accept Bezel design connectors. Smooth Faceplate Bezels are recessed for neater appearance. Plastic housing Flame Retardant (UL 94 V-0). Axcess jacks and adapters can be utilized with these faceplates. Many different styles, colors, adapters, and jacks at any performance applications needed.

Replace the XX at the end of the part number for your desired color choice:

00 - Electrical Ivory • 01 - Office White • SS – Stainless Steel

Measurements:

WIDTH: 3.13"
HEIGHT: 5.00"
DEPTH: .25"

Download:  DRAWING AND SPECS FILE (ACROBAT .PDF)

Custom Aluminum Faceplates

Need a custom faceplate to match your interior? Deklin Technologies can provide faceplates of any size and shape to use with our ARJ11 and ARJ45 jacks, or, with a jack of your choice. They can be painted any color or plated with gold, nickel, powder coat, or just left raw for you to finish. Send us your requirements with dimensions and let us quote you. 

Back To Top

RJ45 Dust Covers

As Ethernet gains in popularity in aviation, so do the demands on the cabling systems.

Deklin Technologies, Inc. is proud to introduce a RJ45 dust cover. Help keep dust, food, water and other contaminants out of your RJ45 connectors with this uniquely designed push in cover.

Deklin offers the cover with or without a 4 inch stainless steel lanyard.

Read the February 2005 Press Release

Back To Top

DHP2MM-6 Head phone Cable

Deklin is now offering a 6ft 2.5mm Headphone cable assembly with male connectors on both ends.

This cable works with MP3 players and Cell phones and other electronic devises.

Please reference Deklin’s Part Number DHP2MM-6.

Download:   DRAWING AND SPECS FILE (ACROBAT .PDF)

                        BROCHURE